標題
How can I create a CD iso HBA from a floppy HBA image?
如何把一個軟盤鏡像的HBA文件轉成光盤ISO格式的HBA文件
關鍵詞
unixware 7.1.4 openserver 6.0.0 714 600 hba host bus adapter floppy image iso boot time loadable isl CD CD-ROM UW7 UW714 OSR6 diskette install installation driver drivers
系統版本
Release
SCO OpenServer Release 6.0.0
UnixWare 7.1.4
問題
Problem
I have a system that does not have a floppy drive and I
need to load a Host Bus Adapter (HBA) driver that I only
have as a floppy image. Is there a way that I can copy the
image to CD?
我有一臺計算機沒有軟驅?zhuān)俏倚枰虞dHBA驅動，我只有HBA驅動的軟盤鏡像文件，
有辦法把這個鏡像文件刻錄到CD上馬？
解決：
Solution
You can convert a HBA floppy image to an iso image as follows:
你可以按以下步驟把HBA的軟盤鏡像文件轉換成光盤ISO鏡像文件：
1) Log into an existing OpenServer 6.0.0 or UnixWare 7.1.4 system
as root.
1)以root用戶登錄已經安裝的OpenServer 6.0或UnixWare 7.1.4 。
2) Download/copy the floppy image into a temporary directory, e.g.
# cd /tmp/floppy.image
2)下載/拷貝軟盤鏡像文件到一個臨時目錄，例如：
# cd /tmp/floppy.image
3) Mount the floppy image using:
# mount `marry -a /tmp/floppy.image` /mnt
3)用以下命令行掛接軟盤鏡像文件：
# mount `marry -a /tmp/floppy.image` /mnt
4) Use mkisofs(8) to create an iso image of the HBA as
follows:
# mkisofs -o hba.iso -r /mnt
4)用mkisofs命令創(chuàng )建HBA的ISO鏡像文件，如下：
# mkisofs -o hba.iso -r /mnt
5) Use cdrecord(1) to burn the iso image to CDROM. e.g.
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
where c,b,t is taken from the output of the command:
# cdrecord --scanbus
The CD can then be used during the ISL of the Operating System.
5)用cdrecord命令把ISO鏡像文件刻錄到光盤，例如：
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
這里c,b,t可以通過如下命令的輸出得到：
# cdrecord --scanbus
這樣刻錄的CD就可以在安裝操作系統的過程中使用了。 | | |
