Questions & Answers:Semi-Automated Visual Inspection
半自動目視檢查的問答
In a webinar onsemi-automated visual inspection of parenteralia many basic questionsregarding visual inspection and alsospecific questions with regard to semi-automated inspection were asked and answered.
在關注射劑半自動目視檢查的網絡(luò )研討會(huì )中，詢問了許多有關目視檢查和半自動檢查的問題。
Q: Our productis a non-transparent oil emulsion in 250 ml and 500 ml bags. Is asemi-automated inspection with cameras conceivable?
問：我們的產品是250毫升和500毫升袋裝不透明油乳液。使用攝像頭進行半自動檢查是否可行？
A: Another method for particle detection should be used. The visualinspection of such a 500 ml bag is almost impossible. To ensure that the bag isfree of particles another method like filtration should be used.
答：應使用另一種微粒檢測方法。此種500 毫升袋的目視檢查幾乎是不可能的。為了確保袋子沒有顆粒，應采用另一種方法，如過濾。
Q: A questionregarding the qualification of a new production line. How to proceed if youhave neither a qualified system nor qualified staff? Both types of qualification need each other.
問：關于新生產線的確認問題。如果既沒有已確認的系統，也沒有已確認的員工，如何進行？這兩種類型的確認都需要。
A: Qualified employees for manual control must be available. Using them, theprocess of semi-automated visual inspection can be qualified. It is the same ifa fully automated system is to be qualified.
答：必須具備可人工操作的已確認的員工?？墒褂盟鼈冞M(jìn)行半自動目視檢查的確認。如果要進行全自動系統的確認，也是同理。
Q: Regardingthe design of a semi-automated machine: Are colors other than black and whiteallowed? As in manual testing. Would grey be better? Is a white backgroundenough?
問：關于半自動設備的設計：是否允許使用黑白以外的顏色？與人工檢測一樣?；疑珪?huì )更好嗎？?jì)H白色背景足夠嗎？
A: Black is the best color here. Once in terms of light reflections andoperator fatigue. Grey would also work. In Annex I, there is no specificrequirement for the background colour of a semi-automated system.
A：黑色是最好的顏色?？紤]光的反射和操作人員的疲勞度?；疑部梢?/span>。GMP附錄1沒有對半自動系統的背景顏色的要求。
Q: What isrequired for the certification of operators and how can eye breaks / inspectiontimes be documented?
問：操作人員的確認需要什么，如何記錄休息/檢查的時間？
A: Operators should have an ophthalmologic certificate (80% normal vision) anda qualification that proves that they can sort out the required defects. Pausetimes / inspection times should be recorded using log on / log off of theoperator; manually by hand or automated.
答：操作人員應擁有眼科證明（80% 的正常視力）并證明自己能夠發現所要求缺陷的資質。應使用操作員上機/下機記錄休息/檢查時間；人工或自動記錄。
Q: What is anoptimal illumination level (in lux) for the inspection of plastic containers insemi-automated systems? And is there a type of illumination you prefer?
問：在半自動化系統中檢查塑料容器的最佳光照水平（以勒克斯表示）是多少？建議使用哪種類型的光照？
A: Higher illuminance levels than glass, but it is up to you to determine thebest illumination for this. Definitely higher than 37500 lux. LED lighting maybe preferred.
答：應使用比玻璃容器更高的照度，但也要根據你的情況確定最佳照明。當然肯定高于 37500 lux ?？梢允走x LED 照明。
Q: Should thesmallest particle sizes determined by a Knapp study be systematically includedin the test kits for qualification?
問：由Knapp 試驗確定的最小顆粒尺寸是否應系統地包含在確認測試套件中？
A: Yes.
答：是的。
Q: What is youropinion / experience of using polarized lenses in a semi-automated system?
問：在半自動系統中使用偏振鏡片您有何看法/經驗？
A: Not good. The naked human eye is best and this is what is expected.
答：不好。肉眼是最好的，這也是所要求的。
Q: Is thatcorrect that the visual inspection in front of black and whitebackground on a fully automated system should not exceed 2 seconds?
問：在全自動系統上過黑白背景目視檢查的實際不應超過 2 秒，這是否正確？
A: No. The speed of the semi-automated conveyor belt should not be too fast.The maximum speed should mathematically be no less than 2 seconds per object inthe inspection area for the operator.
答：不正確。半自動傳送帶的速度不應太快。每個物品在操作員的檢查區域的實際應不小于 2 秒。
Q: Are thereany special requirements for semi-automated inspection for Japan?
問：日本對半自動檢查有什么特殊要求嗎？
A: No. Make sure to sort out all particles and cosmetic defects when youdeliver to Japan.
答：沒有。出口日本市場時，應區分所有顆粒和外觀缺陷。
Q: For acomparative semi-automated versus manual inspection study, do the test kitsizes have to be the same?
問：對于半自動與人工燈檢對比研究，測試套件的大小必須相同嗎？
A: Yes.
答：是的。
Q: Is thatcorrect that after a 100% semi-automated inspection is completed, a manualinspection based on ISO 2859-1 should be performed?
問：在完成 100% 半自動檢查后，應執行基于 ISO 2859-1 的人工檢查，這是否正確？
A: Yes, i.e. sampling based on ISO 2859-1 and manual testing of the samples.The size of the AQL sampling depends on the batch size. Inspection Level IIshould be used.
答：是的，也就是，基于ISO 2859-1的抽樣和人工檢查。AQL 抽樣的大小取決于批量大小。應使用檢查級別 II。
Q: How oftenshould manual inspection operators be qualified (note: requalified)?
問：人工檢查的操作員應多久進行一次確認（注：再確認）？
A: At least once a year.
答：至少每年。
Q: The settingsof the semi-automated system (illumination, rotation speed, etc.) should beselected in such a way that a sufficient inspection process is guaranteedwithout adversely affecting the physico-chemical properties of the product. Howdo you ensure this during qualification?
問：半自動系統的設置（照明、電機轉速等）的選擇應保證足夠的檢測過程，而不會(huì )對產品的物理化學性能產生不利影響。在確認期間，如何確保這一點？
A: For this purpose, you need to perform a stability study, e.g. with thevalidation batches, and show that your inspection process has no influence onthe product quality.
答：為此，需要執行穩定性研究，例如使用驗證批次，并證明檢查過程對產品質量沒有影響。
Q: Do you havespecial experience with different inspection angles in semi-automated systemswhen testing liquids or lyophilized products.
問：在測試液體或凍干產品時，你是否具有在半自動系統中使用不同檢查角度的特殊經驗。
A: Through the lens of the semi-automated machine, the inspection angle shouldnot influence the inspection. The lens should be placed so that the operatorcan see the complete unit. For lyophilized products, the only difference isthat the inspection time for the operator should be shortened because visualinspection of the white powder will cause eye fatigue more quickly.
答：通過半自動機器的鏡頭，檢查角度不應影響檢測。鏡頭應放置以使操作人員可以看到整個的產品。對于凍干產品，唯一的區別是，操作人員的檢查時長應縮短，因為對白色粉末進行目視檢查會(huì )更快地導致眼睛疲勞。
公眾號
GMP辦公室
專業的GMP合規性研究組織
國內外（FDA、EMA、MHRA、CFDA、WHO、PIC/S等）GMP法規解讀；
國內外制藥行業GMP監管動態；
GMP技術指南（ISPE、PDA、ISO、ASTM等）分享
聯系客服
